- - Remotely access computers on your KVM installation via intranet
- - Dual console operation - control your system from both the transmitter and receiver USB consoles
- - OSD (On Screen Display) on both the transmitter and receiver units
- - Supports GUI operation*
- - No software required - an HTTP server is embedded in both units
- - Built-in ASIC for greater reliability and compatibility
- - USB Keyboard and USB Mouse Ports
- - RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
- - Audio enabled
- - USB overcurrent detection and prevention
- - High resolution video - up to 1920 x 1080
- - Supports widescreen formats
- - Ultra-High quality video mode
- - Hot pluggable
- - Rack mountable
- - Firmware upgradable
- - Auto-MDIX - automatically detects cable type
- - Note:
- - * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
- - ** RS-232 serial ports support Tx/Rx signals only.
USB VGA Over IP KVM Extender (1920 x 1080@Unlimited Distance)
The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.
The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.
* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.
ATEN CE790
ATEN CE790
